The physical properties of polymers and polysaccharides depend strongly on their molecular properties, the most important of which are the molecular weight and molecular weight distribution, and the molecular size and structure. Gel permeation chromatography (GPC), also called size-exclusion chromatography (SEC), is the most commonly used tool for assessing these parameters, and is enhanced by coupling it to light scattering and viscometer detectors. In particular, the concurrent measurement of Rg using multi-angle light scattering (MALS) and intrinsic viscosity offers exceptional insight into the structure of synthetic and natural polymer molecules.
Materials and Methods
Figure 1 shows an example chromatogram of pectin including the RI, LS (90°), and IV detectors, and Figure 2 shows the angular data from the SEC-MALS 20 detector. A slight angular dependence can be seen across the different angles, allowing Rg to be measured for this sample.
The Mark-Houwink plot shows that pectin is the highest and therefore the least dense molecule of those under investigation. As a comparison, gum arabic, which has the highest molecular weight, is the lowest on the plot, indicating that it is the smallest or most dense of the different samples.
In summary, the molecular weight, size, and intrinsic viscosity of pectin was measured using the Viscotek TDA and SEC-MALS 20 systems and compared with a selection of other polysaccharides. The differences in molecular structures between the different polysaccharides are very clear and easily observed using the Mark-Houwink plot.
(1) Characterizing polysaccharide structure with SEC-MALS and intrinsic viscosity measurements, Malvern Instruments application note, http://www.malvern.com/MRK1929
Enigma Business Park, Grovewood Road, Malvern, UK
Tel: +44 (0) 1684 892456
E-mail: [email protected]