Paula Holmes, PhD, and Bruce N. Laprade, PHOTONIS USA
Ion mobility spectrometry (IMS) has become widely accepted for the detection of chemical warfare agents, explosives, and narcotics
as well as for pharmaceutical quality control and pesticide screening of food. Most currently available commercial IMS units
have a resolving power of 10–60.
In order to minimize the frequency of false positive and false negative results that create delays and cost overruns, it has
become necessary to design and construct an ion mobility spectrometer with high separation power without compromising instrument
simplicity, serviceability, and cost. Such an instrument can be used in applications where high volume, accuracy, and speed
of specific contaminant identifications are critical, such as those involving product safety, composition analysis, and environmental
PHOTONIS has designed a new IMS analyzer platform designed for simple integration with most mass spectrometers, GCs, and other
analytical instruments. The new IMS analyzer unit combines PHOTONIS' patented Resistive Glass products with a novel robust
ion gate technology to create an IMS analyzer which improves resolution and simplifies serviceability. This new unit provides
significantly higher resolving power (64–150) when compared to most currently available IMS instruments.
Figure 1: IMS analyzer prototype.
In this new IMS analyzer platform, key components made from PHOTONIS Resistive Glass were designed to replace conventional
lens assemblies. Reaction and drift regions of the ion mobility spectrometer were fabricated using Resistive Glass technology,
as they enhance ion throughput and simplify construction.
Resistive Glass is manufactured in a patented process by PHOTONIS in which an electric field is created to guide or direct
charged particles. It consists of alkali-doped lead silicate glass that has been reduced to make the surface a semiconductor.
Resistive Glass can be used to manufacture capillary inlet tubes, drift tubes, ion guides, ion mirrors, collision cells, conversion
diodes, or voltage dividers.
The use of Resistive Glass drift tubes in an IMS Analyzer provides key benefits, such as uniform electric fields with minimal
radial inhomogeneities and ease of construction. In addition, the single-piece construction allows uniform flow of drift gas
without the need for additional containment.
A new novel and robust ion gating assembly was also created for this IMS Analyzer. It comes equipped with a Bradbury-Nielsen
type electronic gate, built using photo-etching technology. The unique approach of the ion gate design results in a device
that is robust, high-performance, low cost, and simple to assemble when compared to the conventional winding technique. The
ability to handle entire grid sets rather than individual wires to insure precise positioning of all wires provides a distinct
advantage to traditional approaches in terms of resolution and serviceability.
The new IMS unit can be operated at room temperature but also features integral heaters that can be operated at temperatures
up to 150 °C.
This new IMS Analyzer is designed to be scaled or customized to interface with a wide variety of instruments to simplify IMS
analysis in applications where a narrow range of contaminants need to be quickly identified. Its unique design allows the
user to quickly and inexpensively perform a simple IMS analysis and receive fast, accurate results. Its higher resolving power
(64–150) lowers the probability of false positive and false negative results for a more efficient analysis.
PHOTONIS USA, Inc.
660 Main Street, Sturbridge, MA 01566
tel. (508) 347-4000, fax (508) 347-3849