This month's instalment surveys traditional and modern approaches for extracting and determining additives, contaminants and
low-molecular-weight components that may be present in synthetic polymers or polymeric materials. After sample workup, components
are typically analysed by chromatographic methods. This information is needed for product certification to comply with governmental
safety and health regulations.
High-purity polymers are typically required for special applications such as implants or prosthetics, pharmaceuticals, electronic
devices and polymer reference standards. Most polymers of commercial interest, however, contain low-molecular-weight additives
that are intentionally added to extend the material's serviceable lifetime or alter its properties and performance. There
are also nonpolymeric compounds, oligomers and low-molecular-weight components found in the polymer that originate from the
polymerization process itself. Lastly, polymeric material can become contaminated during production, handling, storage or
Component levels and their identification are needed for product certification, meeting end-use performance criteria and for
ensuring product stability and safety. (Please note that the term "component" is used throughout this survey as a general
label for additives, residual solvents, unreacted monomers, oligomers, chain fragments, low-molecular-weight polymerization
by-products or reaction side-products or contaminants.) Because extractables and contaminants may pose health risks, especially
if the polymer is processed into film, packaging or parts that contact food, pharmaceuticals, viable organisms and biologicals,
accurate and precise analytical data are required.
To comply with governmental safety, health and transportation regulations, it is necessary for agencies and companies to monitor,
control and certify product quality. This month's Sample Preparation Perspectives instalment surveys approaches for extracting and concentrating polymer additives and side products that may be present in
synthetic polymers or polymeric materials for subsequent chromatographic analysis.
The sample preparation process is an important part of the overall analysis and is often the rate-determining and error-prone
part of the analytical cycle. Nonporous solid materials such as polymers represent a special sample preparation challenge
as many of the additives are located deep within the matrix itself and must be released in a quantitative manner.