Monoclonal antibodies (mABs) are increasingly growing in importance for the diagnosis and therapy of various diseases, including
cancer and autoimmune and inflammatory disorders. One essential parameter to define their quality is the content of aggregates
(dimers, trimers, and higher aggregates). These aggregates can be formed during processing and purification or are the result
of long-term storage. As a result of aggregation, antibodies lose their pharmaceutical efficacy and can facilitate an immunology
Antibody fragments which lack the Fc region can be used for the treatment of diseases. They can also be the result of degradation
of full length antibodies. Therefore, a GPC method, which offers the opportunity to analyse antibodies and their aggregates,
as well as antibody fragments simultaneously, with superior resolution and high sensitivity is invaluable.
GPC/SEC analysis was performed on a PSS SECcurity GPC system, equipped with a PSS SECcurity SLD1000 light scattering detector,
using the following conditions:
Figure 1 shows an overlay of elugrams obtained for a full length antibody and antibody fragments analysed on a single set
Figure 1: Separation range of the column combination. The red curve shows the UV signal of a full length antibody and its
dimers plotted against the elution volume. The blue curve is the elugram of antibody fragments and their high level aggregates.
All three detector signals for the analysis of a monoclonal antibody are shown in Figure 2. The light scattering signal shows
improved sensitivity for high aggregates compared to the other signals.
Figure 2: Sensitive analysis of antibody aggregates. The light scattering signal for the dimer is relatively high compared
to that of the mABs because of molar mass dependency and provides improved sensitivity for the detection of high aggregates
The GPC/SEC method including UV, RI, and RALS can be used for the simultaneous determination of aggregate content of monoclonal
antibodies as well as antibody fragments. The column combination covers the separation range for all three types and provides
a high resolution for the determination of the dimer content. Because of its molecular weight dependency, the PSS SLD1000
RALS detector offers high sensitivity for very small quantities of high aggregates and also allows the determination of the
absolute molecular weight of the antibodies. In addition, it has a unique feature for a light scattering detector as the wavelength
can be altered to increase the sensitivity.
PSS Polymer Standards Service GmbH
In der Dalheimer Wiese 5, D-55120 Mainz, Germany
Tel: + 49 6131 962390 fax: + 49 6131 962390 11