HSS HPLC Columns: An Additional Option for Transferring Methods between HPLC and UPLC Technology

Nov 01, 2009

Zhe Yin, Kenneth J. Fountain, Doug McCabe and Diane M. Diehl, Waters Corporation, Milford, Massachusetts, USA

Introduction



As UPLC users convert or replace their existing HPLC systems with UPLC systems there is a transition period where a method must be run on both platforms. Thus, having the same particle substrate and bonded phases available in HPLC and UPLC particle sizes can significantly ease the burden of method development and transfer from one platform to another. In addition to the ethylene bridged hybrid (BEH) particle, three new high strength silica (HSS) stationary phases for HPLC applications are introduced. Scalability between both column diameter and particle size is demonstrated on both UPLC and HPLC instrumentation.

Results and Discussion


Figure 1
Figure 1 shows the scalability between UPLC and HPLC columns for the separation of paroxetine-related compounds on HSS C18 SB. Gradient, flow-rate and injection volume were properly scaled between different particle sizes and column dimensions. The system volume was properly compensated for when transferring method between UPLC and HPLC instrumentations. Chromatographic resolution and selectivity were maintained across all separation platforms.


Figure 2
Figure 2 demonstrates the scalability between columns with different internal diameters for the separation of a forced degradation sample of glimepiride.

Conclusions

A successful method transfer requires careful consideration of key parameters including system volume, column dimension and particle size, injection volume and gradient profile. Methods can be easily transferred between different systems (UPLC → HPLC → prep), particle sizes and column diameters on the new HSS columns.

For the complete application note, visit http://www.waters.com/32333/

© 2009 Waters Corporation. Waters, The Science of What's Possible, UPLC and ACQUITY UPLC are trademarks of Waters Corporation.




Waters Corporation
34 Maple Street, Milford, Massachusetts 01757, USA
tel. +1 508 478 2000 fax +1 508 478 1990
Website: http://www.waters.com/