Modern Hexane-Extractable Material (Oil and Grease) Analysis in Wastewater Samples
February 1st 2016Initial precision was demonstrated by spiking four 1-L volumes with one Snip and Pour pre-measured standard, each (40 mg). The data for four replicates was collected for 47 mm Disks and 100 mm Disks. The average percent recovery is excellent and meets the criterion specified of 83–101% HEM recovery for both size disks. The standard deviation is better than the criterion specified of 11% for HEM.
The Analysis of 1,4-Dioxane for EPA Method 522 and UCMR 3
June 1st 2012This application note will demonstrate the extraction of 1,4-dioxane from an aqueous matrix using option 1 of EPA Method 522 for 500 mL initial volume sample. It will make use of the SmartPrep Cartridge Extraction system to produce a valid initial demonstration of precision (IDP) and initial demonstration of accuracy (IDA).
Determination of Organic Compounds in Drinking Water Using Atlantic SPE Disks for EPA Method 525.2
June 1st 2008EPA Method 525.2 describes the procedure to determine low ppb levels of semi-volatile organic material in drinking water using solid phase extraction (SPE) or liquid-solid extraction (LSE) techniques. The City of Fort Worth, Water Department implemented an automated SPE process for the analysis of semi-volatiles by EPA Method 525.2, using the Atlantic "Certified for Automation" SPE Disk for EPA Method 525.2. Ethyl acetate, methanol, and water were used to condition the Atlantic disk prior to the extraction step. The extraction solvents used were a 1:1 mixture of methylene chloride and ethyle acetate. Extracts were then analyzed by GC–MS using a splitless injection technique.