Sponsored Content - EU
Solvent-reduced determination of 100 contaminants from low double-digit to low triple-digit pg/L in 100 mL surface water samples, meeting the requirements of the EU-WFD based on SBSE-TD-GC-MS/MS
Co-Precipitation of Metal Carbonate Templated Protein Microparticles
The KNAUER IJM NanoScaler is used to precipitate protein metal carbonate hybrid particles by mixing two inorganic salt solutions in which the protein is dissolved
Fluorotelomer Alcohols in Indoor Air
Monitoring of per- and polyfluoroalkyl substances (PFAS) in air is successfully performed by the US EPA using Thermal Desorption-GC/MS.
Determination of Formaldehyde Emissions from E-Liquids
Novel Thermal Desorption-GC/MS method for determination of formaldehyde using PFPH, automatically loaded onto Tenax TA adsorbent, as derivatization agent.
VDA 278 Method Transition to TD 3.5+
GERSTEL TD 3.5+ Thermal Desorber successfully passes method VDA278 system performance test for automobile material emissions increasing sample capacity and throughput.
Ambient Air Analysis with Dynamic Focusing
VOCs collected from air onto a sorbent packed tube are released by thermal desorption and focused for GC-MS determination using the novel cryogen free dynamic focusing
Identification & Quantification of Trace Microplastics in Environmental Samples by Splitless Micro-Furnace Pyrolysis-GC/MS
Splitless micro-furnace pyrolysis-GC/MS in conjugation with F-Search MPs libraries enable rapid and accurate identification and quantification of trace Microplastics (MPs).