Sponsored Content - EU
This application note describes the two approaches for the Agilent JetClean self-cleaning ion source operation.
Characterising complex petrochemicals
Characterising various complex petrochemicals – including diesel, crude oil and vacuum gas oil – using the enhanced peak capacity of GC×GC–FID with thermal modulation
Improve Semivolatiles Method Performance with Rxi-SVOCms Columns
Featured Application: Semivolatiles on Rxi-SVOCms
PFAS screening during application of foam
Application note shows how thermal desorption GC–MS is used to monitor the release of PFAS during the application of aqueous film-forming foam (AFFF).
Monitoring environmentally damaging gases in PFAS removal
Demonstrating how commercially available TD equipment is used to monitor CF4 & other products of incomplete destruction (PIDs) resulting from PFAS removal technologies.
Measurement of PFAS in indoor air (Nov 2023)
This study investigates the performance of a high-throughput automated thermal desorption instrument coupled to GC–MS/MS for PFAS analysis.
Measuring PFAS pollution in ambient air (Nov 2023)
Measuring PFAS pollution in ambient air with TD–GC–MS/MS at concentrations low as 2 pg/m3. Each of 19 targeted compounds had linear calibration with high repeatability.