
The Role of GC×GC–TOF-MS in Resolving Co-Eluting Volatiles in Mead
Sarah Foster shows how GC×GC–TOF-MS resolves co-eluting mead volatiles, with flame ionization detection flagging trace peaks and system leaks.
At the recent EAS 2026 conference, Sarah Foster of William & Mary presented her group’s work on mead profiling, and LCGC International caught up with her to find out more.1,2 In this interview, she explains why the team chose comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry (GC×GC–TOF-MS) and how the flame ionization detection (FID) channel fits into the workflow.
Mead, made by fermenting honey, contains a complex mixture of volatile compounds drawn from the honey, the yeast, and any added ingredients, which makes it a demanding sample for conventional one-dimensional GC. Foster describes how GC×GC adds a modulator and a secondary column with a distinct stationary phase to a conventional GC. The modulator injects small fractions of effluent from the primary column into the secondary column, separating compounds that eluted together in the first dimension because of similar boiling points. She notes this increases peak capacity, citing studies showing GC×GC approaches a near-theoretical peak capacity about 10 times that of GC, and resolves co-elutions that would otherwise block comprehensive identification.
On the parallel FID channel, Foster says the team relied mainly on mass spectral data to confirm whether low-level analytes were present. Extracted ion current plots from the total ion current let them check for a particular mass even at very low abundance, and much of their data processing software is built on mass spectral data. FID currently serves mostly as a diagnostic tool: a signal in the FID trace with no matching mass spectral signal points to a leak or other system issue. It is also useful for very low-abundance compounds, confirming that an analyte is present in a region of the chromatogram even when its identity cannot be determined.
Foster answered the following questions:
- What led you to choose GCxGC–TOF-MS for profiling mead, and how did the two-dimensional separation help tell samples apart?
- With a flow-modulated system running TOF-MS and FID in parallel, how much did the FID channel help confirm low-level compounds?
References
- Foster, S. C.; Perrault Uptmor, K.; Straight, S. W. Understanding Mead Production via Comprehensive Two-Dimensional Gas Chromatography, Fermentation Kinetics, and Chemometric Analysis. Presented at EAS 2026, in Plainsboro, NJ, USA.
https://eas.org/wp-content/uploads/2026/08/EAS-Preliminary-Program-2026-Updatedx2-1.pdf (accessed 2026-11-20). - Foster, S. C.; Chasse, J. Volatile Organic Compound Profiling of Commercial Kombucha Using GC-TOF-MS and GC×GC-TOF-MS. LCGC International website
https://www.chromatographyonline.com/view/volatile-organic-compound-profiling-of-commercial-kombucha-using-gc-tof-ms-and-gc-gc-tof-ms (accessed 2026-11-20).
Related to this article








