During a session at the Cannabis Science Conference on September 21, Zacariah Hildenbrand, PhD, a research professor in the Department of Chemistry and Biochemistry at the University of Texas, El Paso gave an overview of various analytical methods that are useful in cannabis analysis. "Cannabis is a versatile plant, with many different compounds in its makeup," Hildenbrand said. Enzymes such as cannabigerolic acid (CBGA), tetrahydrocannabinolic acid (THCA), and cannabidolic acid (CBDA) can all have different effects. Commercial testing protocols vary state by state, which can make it difficult to characterize different products.
“It's absolutely critical that we do this with a high degree of accuracy,” he said. “If you don't have the dosing dialed in, which is predicated on accurate testing, then someone can really have a horrible experience.”
To properly separate these compounds, complex instrumentation is required, with techniques such as high-performance liquid chromatography–ultraviolet (HPLC-UV) and headspace gas chromatography–flame ionization detection (GC-FID). Inductively coupled plasma mass spectrometry (ICP–MS) and inductively coupled plasma–optical emission spectroscopy (ICP–OES) can be useful in finding toxins, and quantitative polymerase chain reaction (qPCR) for detecting DNA of different species. Matrix-assisted laser desorption ionization–time-of-flight mass spectrometry (MALDI–TOF-MS)can be usedfor characterizing bacteria.
There are also other factors that can complicate cannabis testing, including unreliable laboratories that may run faulty analyses. Because of this, having proper data analysis and troubleshooting procedures is vital to safe and proper cannabis consumption.
Hildenbrand concluded by emphasizing the importance of paying attention to instruments used in commercial testing, specifically regarding calibration and peak shifts.
“If you're not following that key shift and you're not calibrating on a regular basis, you're missing signal, or you put could be mischaracterizing individual species,” he said.
Hildenbrand, Z. Getting the Most Out of Analytical Testing. In Cannabis Science Conference. Providence, Rhode Island.
TD-GC–MS and IDMS Sample Prep for CRM to Quantify Decabromodiphenyl Ether in Polystyrene Matrix
April 26th 2024At issue in this study was the certified value of decabromodiphenyl ether (BDE 209) in a polystyrene matrix CRM relative to its regulated value in the EU Restriction of Hazardous Substances Directive.
LC–MS/MS-Based System Used to Profile Ceramide Reactions to Diseases
April 26th 2024Scientists from the University of Córdoba in Córdoba, Spain recently used liquid chromatography–tandem mass spectrometry (LC–MS/MS) to comprehensively profile human ceramides to determine their reactions to diseases.
High-Throughput 4D TIMS Method Accelerates Lipidomics Analysis
April 25th 2024Ultrahigh-pressure liquid chromatography coupled to high-resolution mass spectrometry (UHPLC-HRMS) had been previously proposed for untargeted lipidomics analysis, but this updated approach was reported by the authors to reduce run time to 4 min.