Extraction and Analysis of PFAS and GenX from Water by LC–MS/MS

Cryogen-free TD–GC–MS method enables 10 ppt detection of ethylene oxide from fugitive sources, compliant with draft US EPA Method 327.

Cryogen-free TD–GC–MS method enables ppt-level analysis of 30 volatile fluorinated compounds released during PFAS destruction, compliant with US EPA OTM-50.

High-capacity sorptive extraction with GC–MS enables trace analysis of odorants and chlorophenols in water, combining ppt sensitivity with full automation.

An LC-MS/MS method was developed to quantify C1–C4 PFAS in water, using direct injection to improve accuracy and reduce contamination in testing.

Per- and polyfluoroalkyl substances demand precise detection. YMC-Triart C18 columns ensure superior separation and accurate quantification, even in complex matrices.

A separation of ultra-short and long chain PFAS (C1-C18) is performed on a HALO®PCS Phenyl-Hexyl column along with a HALO®PFAS Delay column which demonstrates excellent retention for both hydrophilic and hydrophobic analytes.