CA Agilent
|Articles|June 1, 2004

LCGC Europe

  • LCGC Europe-06-01-2004
  • Volume 17
  • Issue 6

New Chromatography Columns and Accessories at the 2004 Pittcon Conference, Part II

In the final of this two-part series examining trends in column introductions at the recent Pittcon 2004, Ron Majors looks at gas chromatography columns, sample preparation products, hardware, accessories and kits for chromatography and sample preparation.

Articles in this issue


Related to this article

Figure 2. Split injection used to measure triplicate test of MTBE, hexane, o-xylene, and 1-methylnaphthalene comparing different solvents (methanol, methylene chloride) and column insertion distances starting with 0.5 mm, 5.0 mm, 10.0 mm, 15 mm, and 20.0 mm. Methanol had the best performance at the 5.0 mm insertion distance and methylene chloride looked slightly better at the 0.5 mm. We would still recommend not going below the 5.0 mm manufacturer recommended insertion distance.
Revisiting insertion distance for methanol and methylene chloride in GC analysis and confirming that insertion depth strongly affects response and reproducibility.