News|Articles|September 16, 2025

DAR determination of 3rd generation ADCs

This application note provides you an optimum RP method for the DAR determination of a site-specific ADC using a widepore YMC-Triart Bio C4 column.


Related to this article

Figure 2. Split injection used to measure triplicate test of MTBE, hexane, o-xylene, and 1-methylnaphthalene comparing different solvents (methanol, methylene chloride) and column insertion distances starting with 0.5 mm, 5.0 mm, 10.0 mm, 15 mm, and 20.0 mm. Methanol had the best performance at the 5.0 mm insertion distance and methylene chloride looked slightly better at the 0.5 mm. We would still recommend not going below the 5.0 mm manufacturer recommended insertion distance.
Revisiting insertion distance for methanol and methylene chloride in GC analysis and confirming that insertion depth strongly affects response and reproducibility.
Basel, Switzerland. Old town with red stone Munster cathedral on the Rhine river. © SCStock - stock.adobe.com
SFC Europe 2026 brings global experts to Basel for courses, scientific talks, workshops, and insights into greener separation technologies.