Application Notes: General

A methodology for a sensitive and repeatable analysis of PPCPs in drinking water utilizing the QSight SP50 Online SPE system coupled to a QSight 220 MS/MS.

Accurate detection of HAA’s is paramount for the prevention of over oxidation, while still managing enough water sanitation to eliminate water borne pathogens.

Combining the benefits of the ACQUITY APC System with the ACQUITY UPLC Refractive Index (RI) Detector and the ACQUITY QDa Mass Detector yields laboratory efficiencies.

The selection of appropriate column chemistries to separate eighteen polymer additives are routinely monitored in extractables and leachables (E&L) workflows.

A flexible analytical system was used in conjunction with a well-defined informatics workflow to elucidate degradation markers in Li-Ion battery electrolytes.

Combining the APC System with WinGPC UniChrom™ software allows researchers to increase the peak capacity of their research.

Collaborative efforts at Virginia Tech University drive better materials through polymer innovation and additive manufacturing.

Preventing aerosol contamination during pipetting helps you achieve reliable results. Here we address the main contamination mechanisms that need to be avoided.

A comprehensive guide to assessing the odour profiles of products and materials using thermal desorption.

Using TD with GC–MS to analyse microplastic samples, detailing the analysis of bottled beverages to measure the leaching of PET from the plastic bottle into the beverage.

The complementary roles of dynamic headspace and sorptive extraction in the analysis of fragranced consumer products using TD–GC–MS.

Synthetically derived food and beverage dye analysis to meet regulatory requirements aimed at reducing the risk of allergies, cancers, and attention deficits.

This application note describes the molecular weight determination of different polymer samples under micro-GPC conditions with up to 80% less solvent consumption.

This application note demonstrates quantitative analysis of explosive standards by thermally desorb the sample into a GC-MS by a CDS 7550S system. 

This application note outlines a new specialized SPE sorbent for EPH fractionation designed to help overcome the challenges associated with the traditional silica gel approach.

Analyzing crops for beneficial and harmful compounds is an indispensable tool for assessing the viability of various agricultural crops for consumption.

This application note presents data on a rapid, automated polymer degradation study under ultraviolet (UV) light with the presence of oxygen at a controlled temperature.

An isocratic HPLC method for the analysis of aflatoxins. Uses the DFL-10 (filter fluorescence detector) with a photochemical reactor to improve sensitivity.

Select the proper manifold for your individual microbiological testing procedure, choose between reusable and single use funnels or filtration units, and decide between different sizes of manifolds and enjoy the manifold that adapts to your needs.

Automatic membrane filter dispensing either by touch of a button, hands-free motion detection or by using a foot switch minimize risks of secondary contamination.

Innovative design features, coupled with the largest surface areas and fastest flow rates make Minisart® syringe filters the ideal choice for your syringe filtration needs.