Application Notes: General

In reference to the Japanese Pharmacopeia, YMC-Triart Bio C18 was used to analyze the peptide leuprorelin (GnRH analogue) and separate it from its degradation products.

In this application note, YMC’s dedicated SEC column for antibodies, YMC-SEC MAB, has been used to develop a method for bevacizumab using MALLS detection.

Charge variants of 28 mAbs were analyzed under MS-compatible conditions using YMC’s BioPro IEX SF column. Each mAb of different pI was separated from its variants

Mipomersen was analyzed by LC–HRMS using a biocompatible YMC-Triart C8 metal-free column ensuring symmetric peaks, high sensitivity, and no carryover effects.

The antibody-drug conjugate was separated from its aggregates and fragments in only one run using a YMC-SEC MAB column and varying mobile phases.

In this application note, the DAR of the SigmaMAb ADC-mimic was determined using YMC’s BioPro HIC BF column and a nanospray ionization mass spectrometer.

IONICON real-time VOC analyzers are frequently deployed in mobile laboratories, contributing to public safety, tracking air pollution where and when it matters.

The unique design of the 50 cm μPAC™ GEN2 nanoLC column provides superior performance over state-of-the-art packed bed columns, achieving peak capacities of over 1000.

Here we present a mycotoxin screening method for beer grain and beer samples utilizing a HALO PFP column, which enables high sensitivity, high resolution, and high-speed separations for this analysis.

The use of headspace sorptive extraction with GC×GC–TOF-MS to compare the volatile profiles of ground meat and plant-based substitutes.

Discover a reliable and robust HPLC method to separate Δ10-THC and Δ6a,10a-THC isomers produced from Δ9-THC degradation using a chiral HPLC stationary phase.

See chiral separations for anti-viral COVID-19 treatment Remdesivir and its phosphoramidite and nucleoside key-starting materials, on Daicel chiral and achiral columns.

In EPA 524.3, environmental labs are allowed to modify purge and trap/GC-MS conditions for drinking water samples. CDS 7000 series product meets and exceeds the requirements.

In EPA 524.4, nitrogen replaced helium in purging VOCs from drinking water samples. CDS 7000 concentrator with a 7450 autosampler meets and exceeds the requirements.

This application note demonstrates the quantitative sample split capability of 7550S thermal desorber for a group of VOCs with boiling point up to 218 °C.

This application note demonstrates the ability of the Empore EZ-Trace SPE Workstation to effectively extract HEM from water samples under EPA Method 1664.

This application note demonstrates quantitative analysis of monomer contamination in a polymer by TD-GC-MS method in a CDS Pyroprobe.

This application note investigates the thermal decomposition of Bakelite phenol-formaldehyde resin using EGA and multi-step pyrolysis GC-MS.

Achieving up to 70% faster GC PAH analysis. The Zebron ZB-PAH-EU and ZB-PAH-CT enable targeted selectivity for PAHs in food, the environment, electronics, and fuel.